Product description
Data sheet
1 Copper conductor class 1 (H05G-U) or class 5 (H05G-K) according to SR EN 60228
2 Separating layer
3 Heat-resistant reticulated polymer insulation, type EI3 according to SR EN 50363-1
For internal wiring in devices or electrical equipment, where there are high temperatures due to the environment or generated by the device.
The cables have no flame propagation delay.
Reference standard : SR EN 50525-2-42
Rated voltage: UO/U = 300/500 V
Minimum temperature of the cable (measured on the insulation):
– at installation – 25 °C
– during exploitation – 40 °C
Maximum temperature of use: 110 °C
Maximum temperature allowed on the conductor:
- under normal operating conditions: 110 °C
– during short circuit (max. 5 s) :260°C (160°C if there are tinned connections)
Test voltage: 2000 V, 50 Hz, 5 min , in apa
The cables are flame retardant, halogen-free and do not release acid or corrosive gases when burning
Minimum radius of curvature: 5 x exterior diameter
- + Technical data sheet
Data sheet
- + Construction
1 Copper conductor class 1 (H05G-U) or class 5 (H05G-K) according to SR EN 60228
2 Separating layer
3 Heat-resistant reticulated polymer insulation, type EI3 according to SR EN 50363-1- + Field of use
For internal wiring in devices or electrical equipment, where there are high temperatures due to the environment or generated by the device.
The cables have no flame propagation delay.
- + Technical data
Reference standard : SR EN 50525-2-42
Rated voltage: UO/U = 300/500 V
Minimum temperature of the cable (measured on the insulation):– at installation – 25 °C
– during exploitation – 40 °CMaximum temperature of use: 110 °C
Maximum temperature allowed on the conductor:
- under normal operating conditions: 110 °C
– during short circuit (max. 5 s) :260°C (160°C if there are tinned connections)
Test voltage: 2000 V, 50 Hz, 5 min , in apa
The cables are flame retardant, halogen-free and do not release acid or corrosive gases when burningMinimum radius of curvature: 5 x exterior diameter